gprs

A small Arduino library for GSM modules, that just works

Ai-Thinker A9/A9G GPRS (with GPS(A9G)) module C development SDK

GSM+GPRS Radio Access Network Node reloaded for 2024-2025 for newest UHD drivers and supporting Ubuntu 22.04 & 24.04

GTP (GPRS Tunneling Protocol) implemented in pure Golang.

Example of using ESP32 with GSM modem and lwip+pppos

User Plane Gateway (UPG) based on VPP

STM32 HAL library for SIM800 release MQTT client over AT command

Arduino driver for GSM/GPRS module SIMCom SIM800L to make HTTP/S connections with GET and POST methods

MicroPython implementation on Ai-Thinker GPRS module A9 (RDA8955)

Datalogger for MicroPython and CPython.

GPS IoT tracker board for scanning gps and environment information and sending this to a MQTT server via GPRS.

Osmocom Transceiver used by GSM Base Transceiver Station (BTS); mirrored from https://gitea.osmocom.org/cellular-infrastructure/osmo-trx

Arduino-compatible MCU firmware code for sensor-, telemetry-, and gateway-appliances.

5G User Plane Function (UPF) based on VPP

lwIP PPP porting for GSM modem (like sim800)

Connected GPS tracker PCB

Osmocom Gateway GPRS Support Node; Mirror of https://gitea.osmocom.org/cellular-infrastructure/osmo-ggsn

Internetgateway with TTGO T-Call

Pure Rust implementation of 3GPP GTP (GPRS Tunneling Protocol) - GTPv1 and GTPv2

IoT Communications Module for Energy Access. An easy way to get production ready, bi-directional communications for your IoT embedded device. Proiect supported by the EnAccess Foundation - https://enaccess.org